Best Filament for the Sovol SV06 Plus ACE
The SV06 ACE scaled up to 300 × 300 × 350 mm, which buys tall PLA and PETG parts and nothing new on the materials list.
Specs verified 2026-11 · prices refreshed daily · page updated 6 November 2026
The Sovol SV06 Plus ACE is an open-frame printer with a 300 × 300 × 350 mm build volume and a hotend reaching 300°C. It handles PLA, PETG and TPU, and it needs a hardened nozzle before running carbon- or glass-fibre filament. Recommended materials: PLA, PLA+, PETG, TPU.
The SV06 Plus ACE is the SV06 ACE with a bigger bed and 100 mm more Z, and almost nothing else changed, including the filament envelope. Sovol lists PLA, PETG, TPU and PVA. The hotend is all-metal to 300 C with a high-flow nozzle borrowed from the SV07, the bed reaches 100 C, and the frame is an open i3 with diagonal bracing rods. Tom's Hardware recorded the same working range of PLA, PETG and TPU. The useful part is the 350 mm Z: tall vases, helmets in sections and long functional parts that will not fit a 250 mm machine, printed in materials that do not care about chamber temperature.
What the Sovol SV06 Plus ACE prints well
Recommended materials for this printer:
No enclosure, so ABS, ASA, PC and nylon will warp and crack. Stick to PLA, PLA+, PETG and TPU for reliable prints. Carbon- and glass-fibre composites also need a hardened nozzle first.
Speed is deliberately lower than the smaller model, 500 mm/s and 15,000 mm/s² against 600 mm/s and 20,000 mm/s², because a 300 mm moving bed carries more mass. That is fine for the materials it targets. The high-flow nozzle matters more than the headline speed: on a 300 × 300 mm footprint you are laying down long perimeters, so wide extrusion at a 0.2 mm layer height finishes large PLA and PETG parts in reasonable time. Klipper's pressure advance and vibration compensation are both configured, and accelerometers in the toolhead and the bed mean ringing on tall prints is correctable in software rather than a mechanical problem.
Sovol SV06 Plus ACE specs that affect filament
Two caveats. Abrasives need a nozzle change: the stock part is brass, and Sovol's SKD11 hardened kit, about $29, covers the SV06 ACE and SV06 Plus ACE alike, so fit it before any CF or GF filament. And flexibles behave but need restraint, since the bed is the moving axis. Testing produced a good TPU vase at 70 mm/s that started to wobble near the top where the part lost rigidity, which is the classic tall-and-soft failure: slow down above 200 mm of height, raise the nozzle toward 230 C and add brim or a wider base. ABS and ASA stay off the list without an enclosure.
Filament notes for the Sovol SV06 Plus ACE
- Official supported list is PLA, PETG, TPU and PVA, identical to the SV06 ACE despite the larger volume.
- 350 mm of Z is the real gain, so plan tall PLA and PETG parts rather than new material categories.
- No enclosure and no chamber heating means ABS and ASA will warp; do not plan around them.
- The stock 0.4 mm nozzle is brass, so fit the SKD11 hardened kit before any carbon or glass filled filament.
- TPU prints well at around 70 mm/s but wobbles above roughly 200 mm of height on a moving bed.
- The high-flow nozzle plus a 0.2 mm layer is how you keep long perimeters on a 300 mm bed to sane print times.
- Klipper vibration compensation is pre-configured, so fix ringing on tall prints in the profile, not the frame.
The deals above are filtered to the materials the Sovol SV06 Plus ACE handles, aggregated from multiple retailers daily and normalised to cost per kg, so the cheapest in-stock option is always on top. Prices refresh every 24 hours and are region-aware, so switch your region in the nav. Click through to the retailer to confirm the live checkout price.
Frequently Asked Questions
Different printer? See filament by printer for the rest of the lineup, or browse cheapest filament by material.