The Filament Price Index
A daily market read on what 3D-printer filament actually costs per kilogram, built from every price we find online across 41+ stores in 5 regions, in your own currency. Independent of Amazon, aggregates only. This is the number, not a grid.
In October 2026, PLA filament averages €20.32/kg across 41 stores in 5 regions, up 3.5% vs 30 days ago.
PLA is the most listed material we track. Trimmed mean for a standard single spool, every market pooled and converted to euro at the ECB reference rate. Last updated: October 11, 2026.
Last updated: October 11, 2026 · base 100 = 2026-06-29 · 102 days of data
Defaults to your region, or pick any market to compare (handy for research). Each is priced in its own currency.
Common questions
typical range €17.99–€24.99 · 6,073 spools · 26 stores
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median €19.99/kg across 26 stores in Europe. PETG runs €19.99/kg. Budget listings start around €17.99/kg (25th percentile) and premium brands run past €24.99/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · Europe
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | €21.07 | €8.69 | €18–€25 | ▲ 1.5% | 65% | |
| PETG | €20.46 | €8.59 | €16–€25 | ▲ 0.2% | 18% | |
| ABS | €23.16 | €12.89 | €18–€30 | ▼ 1.0% | 7% | |
| ASA | €30.12 | €16.99 | €23–€37 | ▲ 0.4% | 5% | |
| TPU | €28.24 | €12.99 | €21–€36 | ▼ 0.7% | 4% | |
| Nylon (PA) | €67.87 | €23.99 | €52–€80 | ▲ 7.8% | 1% | |
| Polycarbonate | €42.52 | €27.99 | €35–€51 | ▲ 1.0% | 1% |
Materials over time · Europe
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Price by purchase size · Europe
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~4 · PETG ~20-50 · ABS ~5.
By finish · PLA, Europe
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
Top 8 by listing volume; the table below covers all 13.
Top 12 of 13 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | €19.99 | €11.19 | €17–€25 | ▬ | 62% |
| ↳ bundles | €12.94 | €8.16 | €11–€18 | ||
| ↳ bulk / MOQ | €13.00 | €9.25 | €12–€19 | ||
| Silk | €20.99 | €10.39 | €19–€24 | ▬ | 17% |
| ↳ bundles | €12.16 | €7.07 | €11–€14 | ||
| ↳ bulk / MOQ | €16.99 | €10.00 | €14–€21 | ||
| Matte | €19.99 | €8.99 | €18–€22 | ▬ | 13% |
| ↳ bundles | €10.85 | €4.32 | €9–€13 | ||
| ↳ bulk / MOQ | €12.89 | €9.99 | €12–€21 | ||
| Glitter | €22.39 | €19.99 | €21–€26 | ▬ | 1% |
| ↳ bundles | €15.80 | €15.80 | €16–€16 | ||
| ↳ bulk / MOQ | €18.99 | €18.99 | €19–€19 | ||
| Wood | €18.99 | €12.99 | €15–€25 | ▼ 5.0% | 1% |
| ↳ bundles | €14.00 | €10.00 | €14–€14 | ||
| ↳ bulk / MOQ | €15.99 | €14.99 | €16–€18 | ||
| Galaxy | €26.99 | €18.99 | €23–€29 | ▬ | 1% |
| ↳ bulk / MOQ | €23.99 | €23.99 | €24–€24 | ||
| Marble | €20.99 | €10.59 | €19–€24 | ▬ | 1% |
| ↳ bundles | €12.53 | €12.26 | €12–€14 | ||
| ↳ bulk / MOQ | €15.99 | €14.99 | €15–€17 | ||
| Metallic | €25.99 | €18.99 | €20–€28 | ▬ | 1% |
| Glow | €20.99 | €19.19 | €21–€27 | ▬ | 1% |
| ↳ bulk / MOQ | €18.99 | €15.99 | €18–€19 | ||
| Stone | €20.99 | €17.99 | €20–€22 | ▬ | 1% |
| Satin | €17.99 | €17.99 | €18–€18 | ▬ | 0% |
| ↳ bulk / MOQ | €15.99 | €13.49 | €13–€16 | ||
| Gradient | €26.99 | €26.99 | €27–€27 | ▬ | 0% |
By opacity · PLA, Europe
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | €19.99 | €8.99 | €18–€25 | ▬ | 98% |
| ↳ bundles | €12.60 | €4.32 | €11–€16 | ||
| ↳ bulk / MOQ | €15.99 | €9.25 | €12–€21 | ||
| Transparent | €18.99 | €12.99 | €16–€25 | ▬ | 1% |
| ↳ bundles | €10.45 | €8.60 | €9–€11 | ||
| ↳ bulk / MOQ | €11.99 | €10.99 | €12–€14 | ||
| Translucent | €18.99 | €9.99 | €14–€24 | ▼ 2.6% | 1% |
By brand · Europe
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
Top 8 by listing volume; the table below covers all 34.
Top 20 of 35 by listing volume.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| eSUN | €18.99 | 3 | €11.99 | €16–€22 | ▬ | -5% | 12% |
| Elegoo | €17.99 | 3 | €12.49 | €14–€20 | ▬ | -10% | 11% |
| ↳ bundles | €12.00 | €8.70 | €11–€14 | ||||
| Eryone | €20.99 | 6 | €12.99 | €19–€23 | ▬ | +5% | 10% |
| ↳ bundles | €15.99 | €12.00 | €16–€23 | ||||
| ↳ bulk / MOQ | €20.99 | €12.00 | €18–€23 | ||||
| Spectrum | €19.99 | 1 | €12.94 | €19–€32 | ▼ 1.2% | 0% | 9% |
| Polymaker | €23.99 | 1 | €14.99 | €20–€28 | ▼ 4.0% | +20% | 6% |
| SUNLU | €16.99 | 5 | €11.19 | €16–€20 | ▬ | -15% | 6% |
| ↳ bundles | €11.99 | €8.52 | €11–€15 | ||||
| ↳ bulk / MOQ | €11.99 | €9.66 | €11–€14 | ||||
| AzureFilm | €19.79 | 1 | €15.99 | €19–€23 | ▲ 4.2% | -1% | 5% |
| Fiberlogy | €30.58 | 1 | €15.99 | €23–€35 | ▬ | +53% | 4% |
| ↳ bundles | €23.47 | €23.00 | €23–€27 | ||||
| GEEETECH | €13.99 | 3 | €7.19 | €13–€17 | ▬ | -30% | 4% |
| ↳ bundles | €9.04 | €7.07 | €9–€10 | ||||
| The Filament | €15.99 | 1 | €11.99 | €15–€22 | ▬ | -20% | 3% |
| 3DJake | €24.99 | 1 | €17.99 | €20–€27 | ▬ | +25% | 3% |
| ↳ bundles | €24.00 | €19.00 | €19–€25 | ||||
| Fillamentum | €25.45 | 1 | €12.89 | €22–€31 | ▬ | +27% | 3% |
| ↳ bundles | €26.51 | €17.39 | €22–€31 | ||||
| Flashforge | €26.99 | 1 | €23.99 | €27–€28 | ▬ | +35% | 2% |
| ↳ bundles | €59.90 | €49.90 | €50–€70 | ||||
| Snapmaker | €22.99 | 2 | €16.79 | €23–€23 | ▬ | +15% | 2% |
| Extrudr | €34.65 | 1 | €24.99 | €26–€39 | ▬ | +73% | 2% |
| ↳ bundles | €28.00 | €19.20 | €22–€35 | ||||
| Nobufil | €29.99 | 1 | €23.99 | €28–€30 | ▬ | +50% | 2% |
| Recycling Fabrik | €24.00 | 1 | €18.00 | €22–€24 | ▬ | +20% | 2% |
| FormFutura | €33.36 | 2 | €13.99 | €23–€46 | ▼ 7.4% | +67% | 2% |
| TINMORRY | €20.49 | 1 | €16.99 | €20–€21 | ▼ 2.4% | +3% | 2% |
| ↳ bundles | €19.45 | €15.90 | €17–€25 | ||||
| Anycubic | €18.79 | 3 | €10.39 | €16–€21 | ▲ 4.4% | -6% | 2% |
| ↳ bundles | €13.48 | €11.64 | €13–€19 |
By store · Europe
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 30.
Top 12 of 41 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| 3DJake | €20.99 | €10.39 | €17–€28 | ▬ | +5% | 64% |
| ↳ bundles | €23.47 | €11.50 | €16–€35 | |||
| Eryone | €20.99 | €12.99 | €20–€23 | ▬ | +5% | 9% |
| ↳ bundles | €15.99 | €15.99 | €16–€23 | |||
| ↳ bulk / MOQ | €20.99 | €12.00 | €18–€23 | |||
| Elegoo | €17.99 | €12.49 | €14–€21 | ▬ | -10% | 8% |
| ↳ bundles | €12.00 | €9.70 | €11–€13 | |||
| shop.fillamentum.com | €25.45 | €12.89 | €22–€31 | ▬ | +27% | 3% |
| ↳ bundles | €26.51 | €17.39 | €22–€31 | |||
| Flashforge | €26.99 | €23.99 | €27–€28 | ▬ | +35% | 2% |
| ↳ bundles | €59.90 | €49.90 | €50–€70 | |||
| Tinmorry | €20.49 | €16.99 | €20–€21 | ▼ 2.4% | +3% | 2% |
| ↳ bundles | €19.45 | €15.90 | €17–€25 | |||
| Overture3D | €19.99 | €13.99 | €19–€23 | ▬ | 0% | 2% |
| ↳ bundles | €19.84 | €12.00 | €16–€20 | |||
| AliExpress (ESUN Official Store) | €23.89 | €14.19 | €20–€28 | ▲ 1.3% | +20% | 2% |
| eu.snapmaker.com | €22.99 | €16.79 | €23–€25 | ▬ | +15% | 1% |
| Bambu Lab | €22.99 | €22.99 | €23–€28 | ▬ | +15% | 1% |
| AliExpress (GEEETECH Official Store) | €15.39 | €8.49 | €11–€21 | ▲ 42.6% | -23% | 1% |
| ↳ bundles | €9.20 | €7.27 | €9–€10 | |||
| AliExpress (Eryone Direct Store) | €19.09 | €14.69 | €17–€21 | ▲ 12.4% | -5% | 1% |
| ↳ bundles | €21.19 | €20.79 | €21–€21 |
typical range $18.77–$26.99 · 1,918 spools · 26 stores
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median $20.99/kg across 26 stores in United States. PETG runs $19.99/kg. Budget listings start around $18.77/kg (25th percentile) and premium brands run past $26.99/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · United States
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | $22.84 | $8.55 | $19–$27 | ▲ 3.2% | 68% | |
| PETG | $20.57 | $9.97 | $17–$26 | ▲ 0.9% | 15% | |
| ABS | $24.18 | $13.87 | $20–$30 | ▲ 0.3% | 6% | |
| ASA | $29.52 | $15.90 | $24–$35 | ▲ 3.5% | 4% | |
| TPU | $30.17 | $17.99 | $24–$37 | ▼ 7.0% | 5% | |
| Nylon (PA) | $54.89 | $29.99 | $37–$69 | ▲ 3.8% | 1% | |
| Polycarbonate | $37.81 | $26.99 | $30–$40 | ▲ 15.1% | 1% |
Materials over time · United States
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Price by purchase size · United States
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~9 · PETG ~50-100 · ABS ~15-20.
By finish · PLA, United States
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
Top 8 by listing volume; the table below covers all 11.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | $21.99 | $9.89 | $18–$27 | ▬ | 57% |
| ↳ bundles | $11.00 | $7.28 | $11–$17 | ||
| ↳ bulk / MOQ | $11.50 | $9.00 | $10–$13 | ||
| Matte | $19.99 | $8.57 | $18–$23 | ▬ | 17% |
| ↳ bundles | $12.00 | $3.95 | $12–$14 | ||
| ↳ bulk / MOQ | $12.99 | $10.35 | $11–$16 | ||
| Silk | $19.99 | $9.29 | $20–$27 | ▼ 4.8% | 14% |
| ↳ bundles | $13.00 | $6.00 | $11–$14 | ||
| ↳ bulk / MOQ | $14.00 | $10.35 | $12–$17 | ||
| Glitter | $49.99 | $20.99 | $50–$50 | ▬ | 3% |
| ↳ bundles | $15.00 | $14.00 | $14–$16 | ||
| Metallic | $25.99 | $18.99 | $25–$39 | ▬ | 2% |
| ↳ bulk / MOQ | $15.21 | $14.04 | $15–$16 | ||
| Glow | $24.99 | $13.68 | $20–$29 | ▬ | 2% |
| ↳ bundles | $14.40 | $13.60 | $14–$15 | ||
| ↳ bulk / MOQ | $15.60 | $14.04 | $15–$18 | ||
| Galaxy | $24.99 | $18.99 | $25–$25 | ▬ | 1% |
| ↳ bundles | $15.50 | $14.60 | $15–$16 | ||
| ↳ bulk / MOQ | $17.00 | $14.94 | $16–$18 | ||
| Wood | $19.49 | $13.99 | $19–$33 | ▲ 2.6% | 1% |
| ↳ bundles | $11.00 | $10.50 | $11–$11 | ||
| ↳ bulk / MOQ | $10.49 | $9.80 | $10–$11 | ||
| Marble | $20.99 | $11.49 | $20–$26 | ▬ | 1% |
| ↳ bundles | $14.00 | $10.96 | $14–$16 | ||
| ↳ bulk / MOQ | $15.60 | $12.30 | $14–$17 | ||
| Stone | $20.89 | $15.99 | $20–$24 | ▬ | 1% |
| Satin | $19.99 | $19.99 | $20–$20 | ▬ | 1% |
| ↳ bulk / MOQ | $14.99 | $14.99 | $15–$15 | ||
| High-Gloss | $14.99 | $14.99 | $15–$15 | ▬ | 0% |
| ↳ bulk / MOQ | $14.99 | $14.99 | $15–$15 |
By opacity · PLA, United States
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | $20.99 | $8.57 | $19–$26 | ▬ | 96% |
| ↳ bundles | $12.00 | $3.95 | $11–$17 | ||
| ↳ bulk / MOQ | $12.79 | $9.00 | $11–$16 | ||
| Translucent | $24.59 | $11.59 | $15–$50 | ▬ | 4% |
| ↳ bundles | $11.00 | $7.74 | $11–$12 | ||
| ↳ bulk / MOQ | $11.21 | $10.35 | $11–$12 | ||
| Transparent | $16.99 | $13.49 | $14–$20 | ▲ 9.7% | 0% |
| ↳ bundles | $10.75 | $7.69 | $10–$12 | ||
| ↳ bulk / MOQ | $10.49 | $9.00 | $10–$11 |
By brand · United States
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
Top 8 by listing volume; the table below covers all 15.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| Polymaker | $19.99 | 1 | $11.99 | $20–$25 | ▬ | -5% | 22% |
| ↳ bundles | $22.50 | $16.00 | $19–$31 | ||||
| Elegoo | $15.99 | 3 | $13.49 | $14–$19 | ▬ | -24% | 12% |
| ↳ bundles | $12.45 | $7.75 | $11–$16 | ||||
| ↳ bulk / MOQ | $10.25 | $9.80 | $10–$10 | ||||
| Overture | $19.99 | 1 | $11.69 | $18–$22 | ▬ | -5% | 11% |
| ↳ bundles | $13.99 | $8.99 | $12–$15 | ||||
| Eryone | $27.99 | 5 | $8.55 | $22–$30 | ▬ | +33% | 10% |
| ↳ bundles | $24.99 | $9.88 | $20–$32 | ||||
| ↳ bulk / MOQ | $15.99 | $12.00 | $14–$17 | ||||
| Anycubic | $18.99 | 3 | $9.99 | $17–$20 | ▲ 11.8% | -10% | 9% |
| ↳ bundles | $12.30 | $10.64 | $12–$21 | ||||
| ↳ bulk / MOQ | $10.92 | $8.55 | $10–$12 | ||||
| eSUN | $22.99 | 2 | $10.10 | $21–$25 | ▬ | +10% | 9% |
| ↳ bundles | $22.99 | $11.37 | $19–$23 | ||||
| Proto-Pasta | $49.99 | 1 | $19.99 | $50–$50 | ▬ | +138% | 6% |
| BIQU | $51.92 | 1 | $19.99 | $26–$70 | ▲ 3.9% | +147% | 5% |
| TINMORRY | $20.98 | 1 | $17.99 | $20–$26 | ▬ | -0% | 5% |
| ↳ bundles | $17.50 | $14.00 | $18–$30 | ||||
| Flashforge | $26.99 | 1 | $22.99 | $27–$28 | ▬ | +29% | 4% |
| Inslogic | $26.99 | 1 | $21.99 | $23–$30 | ▬ | +29% | 3% |
| Bambu Lab | $19.99 | 1 | $19.99 | $20–$23 | ▬ | -5% | 2% |
| SUNLU | $24.99 | 3 | $9.89 | $15–$36 | ▲ 53.8% | +19% | 1% |
| ↳ bundles | $10.11 | $7.10 | $9–$22 | ||||
| ↳ bulk / MOQ | $12.99 | $10.29 | $11–$14 | ||||
| Kingroon | $9.36 | 3 | $7.46 | $9–$10 | ▲ 1.5% | -55% | 1% |
| ↳ bundles | $9.36 | $7.46 | $9–$10 | ||||
| GEEETECH | $10.99 | 2 | $7.59 | $10–$11 | ▲ 20.6% | -48% | 0% |
| ↳ bundles | $8.00 | $7.00 | $8–$8 | ||||
| Conjure | $30.65 | 1 | $30.65 | $31–$33 | ▬ | +46% | 0% |
| ↳ bundles | $30.65 | $30.65 | $31–$33 | ||||
| ↳ bulk / MOQ | $9.99 | $9.99 | $10–$10 | ||||
| JAYO | $12.87 | 4 | $10.30 | $10–$13 | ▲ 12.0% | -39% | 0% |
| ↳ bundles | $8.15 | $3.95 | $7–$9 |
By store · United States
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 20.
Top 12 of 28 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| Polymaker | $19.99 | $11.99 | $20–$25 | ▬ | -5% | 22% |
| ↳ bundles | $22.50 | $16.00 | $19–$31 | |||
| Overture3D | $19.99 | $11.69 | $18–$22 | ▬ | -5% | 11% |
| ↳ bundles | $13.99 | $8.99 | $12–$15 | |||
| Elegoo | $15.99 | $13.49 | $14–$19 | ▬ | -24% | 11% |
| ↳ bundles | $12.30 | $10.00 | $11–$16 | |||
| ↳ bulk / MOQ | $10.25 | $9.80 | $10–$10 | |||
| Eryone | $27.99 | $10.99 | $25–$30 | ▬ | +33% | 9% |
| ↳ bundles | $27.49 | $20.00 | $25–$37 | |||
| ↳ bulk / MOQ | $15.99 | $12.00 | $14–$17 | |||
| Anycubic | $18.99 | $9.99 | $18–$20 | ▲ 5.6% | -10% | 9% |
| ↳ bulk / MOQ | $10.92 | $8.55 | $10–$12 | |||
| eSUN | $22.99 | $17.99 | $21–$24 | ▬ | +10% | 7% |
| ↳ bundles | $22.99 | $13.33 | $21–$23 | |||
| proto-pasta.com | $49.99 | $19.99 | $50–$50 | ▬ | +138% | 6% |
| biqu.equipment | $56.53 | $19.99 | $40–$70 | ▲ 13.1% | +169% | 6% |
| Tinmorry | $20.98 | $17.99 | $20–$26 | ▬ | -0% | 5% |
| ↳ bundles | $17.50 | $14.00 | $18–$30 | |||
| Flashforge | $26.99 | $22.99 | $27–$28 | ▬ | +29% | 4% |
| store.inslogic3d.com | $26.99 | $21.99 | $23–$30 | ▬ | +29% | 3% |
| Bambu Lab | $19.99 | $19.99 | $20–$23 | ▬ | -5% | 2% |
typical range £15.02–£21.48 · 2,894 spools · 23 stores
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median £17.45/kg across 23 stores in United Kingdom. PETG runs £16.10/kg. Budget listings start around £15.02/kg (25th percentile) and premium brands run past £21.48/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · United Kingdom
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | £18.32 | £7.99 | £15–£21 | ▼ 1.3% | 66% | |
| PETG | £17.32 | £7.59 | £13–£22 | ▼ 3.5% | 18% | |
| ABS | £20.82 | £12.41 | £16–£28 | ▼ 1.7% | 6% | |
| ASA | £28.20 | £13.99 | £21–£34 | ▼ 3.4% | 4% | |
| TPU | £21.92 | £14.99 | £17–£28 | ▼ 9.4% | 4% | |
| Nylon (PA) | £58.44 | £17.99 | £41–£72 | ▲ 11.9% | 1% | |
| Polycarbonate | £37.78 | £25.99 | £31–£47 | ▼ 5.2% | 1% |
Materials over time · United Kingdom
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Price by purchase size · United Kingdom
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~4 · PETG ~5 · TPU ~5.
By finish · PLA, United Kingdom
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
Top 8 by listing volume; the table below covers all 12.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | £17.45 | £7.99 | £15–£22 | ▬ | 63% |
| ↳ bundles | £10.20 | £7.28 | £10–£11 | ||
| ↳ bulk / MOQ | £12.99 | £6.00 | £11–£16 | ||
| Silk | £18.62 | £9.69 | £17–£21 | ▲ 1.2% | 16% |
| ↳ bundles | £10.50 | £7.50 | £10–£12 | ||
| ↳ bulk / MOQ | £13.56 | £9.99 | £13–£17 | ||
| Matte | £17.00 | £8.39 | £16–£18 | ▬ | 13% |
| ↳ bundles | £10.50 | £7.18 | £9–£12 | ||
| ↳ bulk / MOQ | £12.81 | £9.49 | £11–£14 | ||
| Glitter | £21.00 | £17.99 | £19–£23 | ▬ | 1% |
| ↳ bulk / MOQ | £15.99 | £15.99 | £16–£16 | ||
| Galaxy | £20.50 | £15.99 | £18–£26 | ▼ 5.7% | 1% |
| ↳ bundles | £11.25 | £10.50 | £10–£12 | ||
| ↳ bulk / MOQ | £13.99 | £12.99 | £14–£20 | ||
| Wood | £17.45 | £11.95 | £14–£19 | ▬ | 1% |
| Marble | £18.85 | £9.19 | £17–£20 | ▼ 2.3% | 1% |
| Metallic | £22.99 | £15.99 | £19–£24 | ▼ 2.0% | 1% |
| Glow | £17.99 | £14.19 | £17–£23 | ▬ | 1% |
| ↳ bundles | £12.55 | £11.90 | £12–£13 | ||
| ↳ bulk / MOQ | £18.99 | £16.99 | £19–£19 | ||
| Stone | £17.38 | £14.99 | £17–£19 | ▬ | 1% |
| Satin | £16.55 | £11.49 | £11–£17 | ▬ | 1% |
| High-Gloss | £11.49 | £11.49 | £11–£11 | ▬ | 0% |
By opacity · PLA, United Kingdom
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | £17.45 | £7.99 | £15–£21 | ▼ 3.0% | 98% |
| ↳ bundles | £10.50 | £7.28 | £10–£12 | ||
| ↳ bulk / MOQ | £13.56 | £6.00 | £11–£17 | ||
| Transparent | £17.45 | £7.99 | £15–£22 | ▬ | 1% |
| ↳ bulk / MOQ | £12.99 | £8.99 | £11–£14 | ||
| Translucent | £12.99 | £8.69 | £13–£17 | ▼ 25.6% | 1% |
By brand · United Kingdom
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
Top 8 by listing volume; the table below covers all 29.
Top 20 of 30 by listing volume.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| eSUN | £17.45 | 2 | £11.05 | £15–£18 | ▬ | 0% | 12% |
| Eryone | £16.99 | 5 | £10.39 | £16–£20 | ▬ | -3% | 10% |
| ↳ bundles | £12.99 | £9.83 | £13–£18 | ||||
| ↳ bulk / MOQ | £14.31 | £6.00 | £13–£18 | ||||
| Elegoo | £15.99 | 4 | £11.49 | £13–£17 | ▬ | -8% | 10% |
| ↳ bundles | £10.50 | £8.50 | £10–£12 | ||||
| Spectrum | £18.40 | 1 | £11.91 | £17–£29 | ▼ 1.2% | +5% | 10% |
| SUNLU | £15.65 | 5 | £8.49 | £13–£17 | ▬ | -10% | 7% |
| ↳ bundles | £9.80 | £7.27 | £9–£10 | ||||
| ↳ bulk / MOQ | £10.99 | £8.49 | £10–£12 | ||||
| Polymaker | £22.08 | 1 | £13.79 | £18–£26 | ▼ 2.0% | +27% | 7% |
| AzureFilm | £18.21 | 1 | £14.70 | £17–£21 | ▲ 4.4% | +4% | 6% |
| Fiberlogy | £28.12 | 1 | £14.70 | £21–£32 | ▬ | +61% | 4% |
| ↳ bundles | £21.52 | £21.25 | £22–£25 | ||||
| The Filament | £14.70 | 1 | £11.05 | £14–£20 | ▬ | -16% | 4% |
| GEEETECH | £12.85 | 3 | £7.09 | £12–£15 | ▬ | -26% | 4% |
| ↳ bundles | £7.70 | £7.50 | £8–£8 | ||||
| TINMORRY | £13.99 | 1 | £9.99 | £14–£16 | ▬ | -20% | 3% |
| ↳ bundles | £13.20 | £8.50 | £10–£15 | ||||
| 3DJake | £23.00 | 1 | £16.55 | £18–£25 | ▬ | +32% | 3% |
| ↳ bundles | £22.09 | £17.48 | £17–£23 | ||||
| Overture | £14.99 | 1 | £9.01 | £14–£17 | ▬ | -14% | 3% |
| ↳ bundles | £15.25 | £10.00 | £13–£18 | ||||
| Extrudr | £32.00 | 1 | £23.00 | £24–£36 | ▲ 4.3% | +83% | 2% |
| ↳ bundles | £25.80 | £17.67 | £21–£33 | ||||
| Nobufil | £27.50 | 1 | £22.08 | £26–£28 | ▬ | +58% | 2% |
| Recycling Fabrik | £22.08 | 1 | £16.56 | £20–£22 | ▬ | +27% | 2% |
| Bambu Lab | £17.99 | 1 | £17.99 | £18–£21 | ▬ | +3% | 2% |
| Prusa | £30.50 | 1 | £20.60 | £30–£34 | ▬ | +75% | 2% |
| FormFutura | £29.44 | 1 | £12.85 | £19–£42 | ▬ | +69% | 2% |
| Anycubic | £14.70 | 4 | £7.99 | £12–£18 | ▲ 2.2% | -16% | 2% |
By store · United Kingdom
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 16.
Top 12 of 20 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| 3DJake | £19.30 | £9.55 | £16–£25 | ▲ 2.9% | +11% | 70% |
| ↳ bundles | £21.52 | £10.59 | £15–£29 | |||
| Eryone | £16.99 | £11.99 | £16–£20 | ▬ | -3% | 9% |
| ↳ bundles | £12.99 | £11.99 | £13–£18 | |||
| ↳ bulk / MOQ | £14.31 | £6.00 | £13–£18 | |||
| Elegoo | £15.99 | £11.49 | £12–£17 | ▬ | -8% | 7% |
| ↳ bundles | £10.50 | £8.50 | £10–£12 | |||
| Tinmorry | £13.99 | £9.99 | £14–£16 | ▬ | -20% | 3% |
| ↳ bundles | £13.20 | £8.50 | £10–£15 | |||
| Overture3D | £14.99 | £9.01 | £14–£17 | ▬ | -14% | 3% |
| ↳ bundles | £15.25 | £10.00 | £13–£18 | |||
| Bambu Lab | £17.99 | £17.99 | £18–£21 | ▬ | +3% | 2% |
| SUNLU | £11.49 | £8.49 | £8–£16 | ▼ 11.5% | -34% | 1% |
| ↳ bundles | £10.10 | £9.00 | £10–£10 | |||
| ↳ bulk / MOQ | £10.99 | £8.49 | £10–£12 | |||
| Flashforge | £23.99 | £21.99 | £23–£27 | ▬ | +37% | 1% |
| AliExpress (ESUN Official Store) | £20.19 | £13.39 | £17–£27 | ▬ | +16% | 1% |
| Joybuy UK | £7.99 | £7.99 | £8–£13 | ▬ | -54% | 0% |
| AliExpress (GEEETECH Official Store) | £10.59 | £8.69 | £10–£11 | ▲ 17.8% | -39% | 0% |
| ↳ bundles | £7.70 | £7.50 | £8–£8 | |||
| AliExpress (ERYONE Official Store) | £15.19 | £10.39 | £13–£17 | ▲ 8.9% | -13% | 0% |
typical range C$18.99–C$29.99 · 1,780 spools · 18 stores
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median C$24.99/kg across 18 stores in Canada. PETG runs C$22.50/kg. Budget listings start around C$18.99/kg (25th percentile) and premium brands run past C$29.99/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · Canada
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | C$25.12 | C$11.95 | C$19–C$30 | ▼ 12.0% | 63% | |
| PETG | C$23.64 | C$12.08 | C$18–C$26 | ▼ 5.7% | 19% | |
| ABS | C$26.59 | C$13.99 | C$20–C$32 | ▲ 0.5% | 8% | |
| ASA | C$36.30 | C$19.99 | C$30–C$40 | ▲ 28.2% | 3% | |
| TPU | C$45.97 | C$19.99 | C$32–C$54 | ▲ 41.5% | 4% | |
| Nylon (PA) | C$91.00 | C$39.00 | C$50–C$124 | ▲ 44.2% | 2% | |
| Polycarbonate | C$51.72 | C$27.99 | C$43–C$67 | ▲ 17.9% | 2% |
Materials over time · Canada
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Price by purchase size · Canada
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~5 · PETG ~10 · ABS ~10.
By finish · PLA, Canada
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
Top 8 by listing volume; the table below covers all 10.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | C$22.99 | C$11.95 | C$18–C$28 | ▬ | 60% |
| ↳ bundles | C$15.00 | C$11.34 | C$15–C$18 | ||
| ↳ bulk / MOQ | C$28.99 | C$14.00 | C$27–C$33 | ||
| Silk | C$27.99 | C$12.99 | C$23–C$33 | ▬ | 15% |
| ↳ bundles | C$18.00 | C$10.50 | C$18–C$18 | ||
| ↳ bulk / MOQ | C$32.99 | C$26.99 | C$29–C$34 | ||
| Matte | C$24.99 | C$14.49 | C$19–C$28 | ▬ | 14% |
| ↳ bundles | C$19.00 | C$11.25 | C$19–C$22 | ||
| ↳ bulk / MOQ | C$32.99 | C$18.19 | C$31–C$33 | ||
| Metallic | C$25.99 | C$18.99 | C$25–C$32 | ▬ | 2% |
| Wood | C$29.99 | C$18.99 | C$27–C$32 | ▬ | 2% |
| Galaxy | C$31.99 | C$19.99 | C$26–C$35 | ▬ | 2% |
| ↳ bulk / MOQ | C$31.99 | C$31.99 | C$32–C$32 | ||
| Glitter | C$31.99 | C$24.99 | C$27–C$32 | ▬ | 2% |
| ↳ bundles | C$22.00 | C$20.00 | C$20–C$24 | ||
| Glow | C$29.99 | C$14.99 | C$27–C$32 | ▬ | 2% |
| Marble | C$26.99 | C$17.28 | C$26–C$32 | ▼ 5.3% | 1% |
| Stone | C$24.99 | C$24.99 | C$25–C$25 | ▬ | 1% |
By opacity · PLA, Canada
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | C$24.99 | C$11.95 | C$20–C$30 | ▬ | 98% |
| ↳ bundles | C$17.80 | C$11.25 | C$15–C$20 | ||
| ↳ bulk / MOQ | C$30.99 | C$14.00 | C$27–C$33 | ||
| Transparent | C$14.99 | C$12.99 | C$15–C$27 | ▬ | 1% |
| Translucent | C$22.99 | C$12.99 | C$21–C$23 | ▬ | 1% |
By brand · Canada
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
Top 8 by listing volume; the table below covers all 28.
Top 20 of 28 by listing volume.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| Bambu Lab | C$25.99 | 4 | C$14.99 | C$23–C$32 | ▬ | +4% | 19% |
| eSUN | C$19.99 | 2 | C$13.50 | C$18–C$25 | ▬ | -20% | 13% |
| ↳ bundles | C$21.73 | C$20.00 | C$22–C$25 | ||||
| Elegoo | C$22.99 | 3 | C$17.99 | C$20–C$27 | ▬ | -8% | 12% |
| ↳ bundles | C$18.00 | C$11.64 | C$15–C$20 | ||||
| ↳ bulk / MOQ | C$14.00 | C$14.00 | C$14–C$14 | ||||
| 3D Printing Canada | C$22.99 | 1 | C$14.99 | C$20–C$26 | ▬ | -8% | 9% |
| Polymaker | C$27.99 | 2 | C$22.99 | C$27–C$50 | ▬ | +12% | 8% |
| Eryone | C$28.99 | 2 | C$19.99 | C$27–C$33 | ▬ | +16% | 7% |
| ↳ bulk / MOQ | C$30.99 | C$16.00 | C$29–C$33 | ||||
| Spectrum Filaments | C$34.99 | 1 | C$22.99 | C$25–C$40 | ▬ | +40% | 6% |
| Filaments Depot | C$22.50 | 1 | C$12.99 | C$22–C$25 | ▬ | -10% | 4% |
| D3D | C$14.99 | 1 | C$14.99 | C$15–C$29 | ▬ | -40% | 3% |
| D3D Sigma | C$16.99 | 1 | C$11.95 | C$15–C$17 | ▬ | -32% | 3% |
| Unveil Form | C$19.99 | 1 | C$12.49 | C$14–C$50 | ▬ | -20% | 2% |
| ↳ bundles | C$13.75 | C$11.25 | C$14–C$50 | ||||
| EconoFil | C$14.99 | 1 | C$12.49 | C$13–C$16 | ▬ | -40% | 2% |
| Flashforge | C$34.99 | 1 | C$31.99 | C$35–C$37 | ▬ | +40% | 2% |
| R3D | C$29.99 | 1 | C$24.99 | C$25–C$30 | ▬ | +20% | 2% |
| Ultimaker | C$111.79 | 1 | C$111.79 | C$112–C$112 | ▬ | +347% | 2% |
| Prusa Research | C$59.99 | 2 | C$41.99 | C$42–C$62 | ▬ | +140% | 1% |
| SUNLU | C$18.99 | 3 | C$14.48 | C$17–C$19 | ▬ | -24% | 1% |
| ↳ bundles | C$13.48 | C$10.64 | C$12–C$15 | ||||
| D3D-B | C$15.99 | 1 | C$12.99 | C$15–C$28 | ▬ | -36% | 1% |
| Raise3D | C$60.99 | 1 | C$42.99 | C$43–C$84 | ▬ | +144% | 1% |
| 3DXTECH | C$130.66 | 2 | C$75.95 | C$82–C$154 | ▼ 7.5% | +423% | 0% |
By store · Canada
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 12.
Top 12 of 13 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| Digitmakers.ca | C$22.99 | C$11.95 | C$18–C$30 | ▬ | -8% | 38% |
| ↳ bundles | C$21.73 | C$20.00 | C$22–C$25 | |||
| 3D Printing Canada | C$25.99 | C$12.49 | C$21–C$35 | ▬ | +4% | 24% |
| ↳ bundles | C$49.99 | C$11.25 | C$14–C$95 | |||
| Elegoo | C$22.99 | C$17.99 | C$20–C$27 | ▬ | -8% | 12% |
| ↳ bundles | C$18.00 | C$14.00 | C$15–C$20 | |||
| ↳ bulk / MOQ | C$14.00 | C$14.00 | C$14–C$14 | |||
| Voxel Factory | C$39.99 | C$21.99 | C$28–C$63 | ▼ 2.4% | +60% | 9% |
| Eryone | C$28.99 | C$19.99 | C$27–C$32 | ▬ | +16% | 6% |
| ↳ bulk / MOQ | C$30.99 | C$16.00 | C$29–C$33 | |||
| Bambu Lab | C$25.99 | C$25.99 | C$26–C$32 | ▬ | +4% | 4% |
| Filaments.ca | C$15.99 | C$12.49 | C$13–C$17 | ▬ | -36% | 3% |
| Flashforge | C$34.99 | C$31.99 | C$35–C$37 | ▬ | +40% | 2% |
| AliExpress (ESUN Official Store) | C$53.34 | C$15.18 | C$46–C$58 | ▬ | +113% | 1% |
| AliExpress (ERYONE Store) | C$58.69 | C$55.99 | C$57–C$61 | ▲ 0.5% | +135% | 0% |
| AliExpress (SUNLU Tech Store) | C$13.82 | C$11.34 | C$12–C$15 | ▼ 0.2% | -45% | 0% |
| ↳ bundles | C$13.82 | C$11.34 | C$12–C$15 | |||
| AliExpress (GEEETECH Official Store) | C$16.88 | C$11.38 | C$16–C$17 | ▲ 31.0% | -32% | 0% |
typical range A$22.95–A$38.99 · 348 spools · 14 stores
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median A$28.99/kg across 14 stores in Australia. PETG runs A$23.75/kg. Budget listings start around A$22.95/kg (25th percentile) and premium brands run past A$38.99/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · Australia
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | A$30.03 | A$12.79 | A$23–A$39 | ▲ 5.4% | 70% | |
| PETG | A$27.75 | A$15.79 | A$21–A$35 | ▲ 1.6% | 14% | |
| ABS | A$30.52 | A$12.79 | A$24–A$37 | ▲ 4.1% | 7% | |
| ASA | A$35.28 | A$24.95 | A$25–A$45 | ▼ 8.6% | 3% | |
| TPU | A$31.43 | A$25.39 | A$28–A$33 | ▲ 2.6% | 4% | |
| Polycarbonate | A$51.49 | A$39.99 | A$40–A$62 | ▲ 1.0% | 2% |
Materials over time · Australia
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Price by purchase size · Australia
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~10 · PETG ~10 · TPU ~10.
By finish · PLA, Australia
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | A$24.95 | A$14.89 | A$21–A$36 | ▬ | 61% |
| ↳ bundles | A$15.59 | A$12.84 | A$15–A$16 | ||
| Silk | A$24.95 | A$16.49 | A$25–A$44 | ▬ | 16% |
| ↳ bundles | A$19.99 | A$13.10 | A$18–A$20 | ||
| Matte | A$30.99 | A$15.19 | A$25–A$34 | ▬ | 13% |
| ↳ bundles | A$15.05 | A$10.80 | A$13–A$21 | ||
| Metallic | A$38.99 | A$28.99 | A$29–A$39 | ▲ 34.5% | 2% |
| ↳ bundles | A$21.05 | A$19.50 | A$20–A$23 | ||
| Glitter | A$38.99 | A$24.95 | A$39–A$39 | ▬ | 2% |
| ↳ bundles | A$19.18 | A$18.90 | A$19–A$19 | ||
| Marble | A$38.99 | A$24.95 | A$26–A$46 | ▬ | 2% |
| Wood | A$24.95 | A$23.99 | A$25–A$25 | ▬ | 2% |
| ↳ bundles | A$16.90 | A$16.90 | A$17–A$20 | ||
| Galaxy | A$32.97 | A$24.95 | A$25–A$41 | ▬ | 2% |
| ↳ bundles | A$21.25 | A$20.40 | A$20–A$22 |
By opacity · PLA, Australia
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | A$30.99 | A$14.89 | A$23–A$39 | ▲ 9.9% | 98% |
| ↳ bundles | A$16.71 | A$11.14 | A$15–A$19 | ||
| Translucent | A$20.47 | A$18.95 | A$20–A$22 | ▲ 3.3% | 2% |
By brand · Australia
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| Elegoo | A$24.95 | 3 | A$18.95 | A$22–A$33 | ▬ | -14% | 52% |
| ↳ bundles | A$17.84 | A$11.27 | A$16–A$20 | ||||
| Bambu Lab | A$30.99 | 1 | A$30.99 | A$31–A$39 | ▬ | +7% | 18% |
| Flashforge | A$40.99 | 1 | A$36.99 | A$41–A$44 | ▬ | +41% | 11% |
| JAYO | A$14.04 | 6 | A$11.14 | A$12–A$15 | ▲ 10.6% | -52% | 5% |
| ↳ bundles | A$14.04 | A$11.14 | A$12–A$15 | ||||
| eSUN | A$52.99 | 1 | A$15.19 | A$46–A$58 | ▼ 0.2% | +83% | 5% |
| SUNLU | A$21.59 | 2 | A$14.89 | A$20–A$26 | ▲ 0.9% | -26% | 3% |
| ↳ bundles | A$13.61 | A$10.80 | A$12–A$16 | ||||
| GEEETECH | A$26.99 | 2 | A$11.29 | A$20–A$28 | ▲ 44.4% | -7% | 3% |
| Eryone | A$45.59 | 2 | A$21.39 | A$41–A$48 | ▲ 2.6% | +57% | 2% |
| Kingroon | A$16.46 | 2 | A$11.97 | A$15–A$21 | ▼ 4.7% | -43% | 1% |
| ↳ bundles | A$16.46 | A$11.97 | A$15–A$21 |
By store · Australia
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 9.
Top 12 of 14 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| Elegoo | A$24.95 | A$18.95 | A$22–A$32 | ▬ | -14% | 52% |
| ↳ bundles | A$17.84 | A$14.50 | A$16–A$20 | |||
| Bambu Lab | A$30.99 | A$30.99 | A$31–A$39 | ▬ | +7% | 18% |
| Flashforge | A$40.99 | A$36.99 | A$41–A$44 | ▬ | +41% | 11% |
| AliExpress (ESUN Official Store) | A$52.99 | A$15.19 | A$46–A$58 | ▼ 0.2% | +83% | 5% |
| AliExpress (GEEETECH Official Store) | A$25.89 | A$11.29 | A$20–A$28 | ▲ 38.5% | -11% | 2% |
| AliExpress (ERYONE Store) | A$45.99 | A$21.39 | A$42–A$48 | ▲ 0.4% | +59% | 2% |
| AliExpress (SUNLU Tech Store) | A$22.79 | A$14.89 | A$19–A$28 | ▲ 11.8% | -21% | 2% |
| ↳ bundles | A$13.52 | A$10.80 | A$12–A$17 | |||
| AliExpress (SUNLU3D Store) | A$21.59 | A$19.09 | A$20–A$24 | ▼ 0.9% | -26% | 2% |
| ↳ bundles | A$13.64 | A$10.87 | A$13–A$15 | |||
| AliExpress (Geeetech Brand Store) | A$23.24 | A$19.49 | A$19–A$27 | ▲ 18.0% | -20% | 1% |
| AliExpress (AW 3DPrinting Store) | A$11.80 | A$11.30 | A$12–A$14 | ▲ 3.1% | -59% | 1% |
| ↳ bundles | A$11.80 | A$11.30 | A$12–A$14 | |||
| AliExpress (DICHUANG Store) | A$13.87 | A$11.48 | A$13–A$15 | ▲ 6.8% | -52% | 1% |
| ↳ bundles | A$13.87 | A$11.48 | A$13–A$15 | |||
| AliExpress (3DJAYO Online Store) | A$17.74 | A$14.07 | A$15–A$21 | ▬ | -39% | 1% |
| ↳ bundles | A$17.74 | A$14.07 | A$15–A$21 |
These are typical market prices (medians and trimmed means), not deals. The cheapest live listings are on the deals page.
How much does 3D printer filament cost?
As of October 11, 2026, a standard 1 kg spool of PLA sells for a median €19.99/kg across 41 stores in Global (all markets, EUR). PETG runs €17.99/kg. Budget listings start around €16.36/kg (25th percentile) and premium brands run past €24.00/kg. These figures are market aggregates, refreshed every day. Per-listing prices are on the deals page.
By material · Global (all markets, EUR)
Average price per kilogram for a standard single spool (a 10% trimmed mean, so it moves with the market instead of sticking on round price points), with the typical range (25th–75th percentile) and the sub-index move since base. Aggregates across every store we track, never any single seller's price.
| Material | Avg /kg | Lowest | Typical range | Since base | Share | Trend |
|---|---|---|---|---|---|---|
| PLA | €20.32 | – | €16–€24 | ▼ 0.7% | 65% | |
| PETG | €19.38 | – | €14–€24 | ▼ 2.8% | 18% | |
| ABS | €22.23 | – | €17–€29 | ▼ 2.6% | 7% | |
| ASA | €29.41 | – | €22–€37 | ▼ 0.9% | 4% | |
| TPU | €27.27 | – | €21–€34 | ▼ 1.6% | 4% | |
| Nylon (PA) | €62.36 | – | €45–€77 | ▲ 7.1% | 1% | |
| Polycarbonate | €38.76 | – | €31–€44 | ▼ 1.5% | 1% |
Materials over time · Global (all markets, EUR)
Every material as its own line: solid = single spools, dashed = bundles (per kg of the pack), dotted = bulk/MOQ. Untick a segment to hide it; hover a material in the legend to highlight all its lines.
Regions compared · PLA, in EUR
Each market's median PLA price converted at today's ECB reference rate (rate held constant across the series, so lines show price movement, not currency movement).
Price by purchase size · Global (all markets, EUR)
The bulk curve: median price per kg by how much you buy in one go (singles, bundles and minimum-order lots pooled). Best per-kg price today lands at: PLA ~9 · PETG ~50-100 · ABS ~10.
By finish · PLA, Global (all markets, EUR)
Silk, matte, glow and friends, compared inside PLA, where nearly every specialty finish lives. Standard means PLA with no special finish. Finish tables for other materials are on each material's page.
Top 8 by listing volume; the table below covers all 14.
Top 12 of 14 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Standard | €19.31 | €7.50 | €16–€25 | ▲ 0.8% | 61% |
| ↳ bundles | €11.20 | €6.49 | €10–€15 | ||
| ↳ bulk / MOQ | €12.31 | €7.08 | €11–€18 | ||
| Silk | €20.99 | €8.15 | €18–€24 | ▬ | 16% |
| ↳ bundles | €11.99 | €5.36 | €11–€13 | ||
| ↳ bulk / MOQ | €15.99 | €9.24 | €13–€20 | ||
| Matte | €18.99 | €7.65 | €17–€21 | ▬ | 14% |
| ↳ bundles | €11.29 | €3.52 | €9–€13 | ||
| ↳ bulk / MOQ | €12.99 | €9.24 | €12–€16 | ||
| Glitter | €22.99 | €15.54 | €21–€30 | ▬ | 2% |
| ↳ bundles | €12.54 | €11.77 | €12–€15 | ||
| ↳ bulk / MOQ | €18.86 | €16.95 | €19–€19 | ||
| Wood | €18.99 | €11.91 | €16–€23 | ▬ | 1% |
| ↳ bundles | €9.82 | €9.37 | €10–€13 | ||
| ↳ bulk / MOQ | €9.36 | €8.75 | €9–€10 | ||
| Galaxy | €23.60 | €12.54 | €20–€27 | ▼ 1.6% | 1% |
| ↳ bundles | €13.77 | €12.39 | €13–€14 | ||
| ↳ bulk / MOQ | €20.07 | €13.33 | €16–€24 | ||
| Metallic | €23.19 | €11.91 | €20–€28 | ▲ 0.2% | 1% |
| ↳ bundles | €12.54 | €12.14 | €12–€14 | ||
| ↳ bulk / MOQ | €13.23 | €9.25 | €13–€14 | ||
| Marble | €20.59 | €10.25 | €19–€24 | ▲ 1.2% | 1% |
| ↳ bundles | €12.49 | €9.78 | €11–€14 | ||
| ↳ bulk / MOQ | €14.99 | €10.98 | €14–€15 | ||
| Glow | €20.99 | €9.40 | €19–€26 | ▬ | 1% |
| ↳ bundles | €13.56 | €11.15 | €13–€14 | ||
| ↳ bulk / MOQ | €17.84 | €12.53 | €14–€19 | ||
| Stone | €20.75 | €14.27 | €19–€22 | ▼ 1.1% | 1% |
| Satin | €17.99 | €13.56 | €18–€18 | ▬ | 0% |
| ↳ bulk / MOQ | €14.74 | €13.38 | €13–€16 | ||
| Rainbow | €24.99 | €21.95 | €25–€26 | ▲ 7.9% | 0% |
By opacity · PLA, Global (all markets, EUR)
Opaque versus transparent and translucent PLA. Transparent PETG, the other big see-through family, is on the PETG page.
| Median /kg | Lowest | Typical range | 7-day | Share | |
|---|---|---|---|---|---|
| Opaque | €19.99 | €7.50 | €16–€24 | ▬ | 97% |
| ↳ bundles | €11.79 | €3.52 | €10–€14 | ||
| ↳ bulk / MOQ | €14.00 | €7.08 | €12–€18 | ||
| Translucent | €18.41 | €8.15 | €14–€26 | ▼ 3.1% | 1% |
| ↳ bundles | €9.82 | €6.91 | €10–€11 | ||
| ↳ bulk / MOQ | €10.00 | €9.24 | €10–€10 | ||
| Transparent | €18.99 | €8.15 | €16–€25 | ▲ 1.3% | 1% |
| ↳ bundles | €9.65 | €6.86 | €9–€10 | ||
| ↳ bulk / MOQ | €11.49 | €8.03 | €9–€14 |
By brand · Global (all markets, EUR)
Each brand's typical price across its full range we track (all materials mixed, so brands heavy in engineering filament read higher). Every row aggregates at least three stores; per-material brand tables live on the material pages above.
Top 8 by listing volume; the table below covers all 53.
Top 20 of 55 by listing volume.
| Median /kg | Stores | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|---|
| Elegoo | €16.93 | 4 | €11.28 | €14–€19 | ▲ 0.1% | -15% | 12% |
| ↳ bundles | €11.29 | €6.91 | €10–€14 | ||||
| ↳ bulk / MOQ | €8.92 | €8.75 | €9–€9 | ||||
| eSUN | €18.99 | 5 | €8.47 | €16–€22 | ▬ | -5% | 11% |
| ↳ bundles | €20.52 | €10.15 | €16–€21 | ||||
| Eryone | €20.99 | 6 | €7.63 | €19–€24 | ▬ | +5% | 9% |
| ↳ bundles | €17.84 | €8.82 | €15–€23 | ||||
| ↳ bulk / MOQ | €18.09 | €7.08 | €15–€21 | ||||
| Polymaker | €21.99 | 4 | €10.70 | €18–€27 | ▼ 1.2% | +10% | 9% |
| ↳ bundles | €20.08 | €14.28 | €17–€28 | ||||
| Spectrum | €21.59 | 1 | €12.94 | €19–€32 | ▲ 0.3% | +8% | 6% |
| SUNLU | €17.34 | 6 | €8.83 | €15–€20 | ▲ 0.3% | -13% | 5% |
| ↳ bundles | €11.56 | €6.34 | €10–€13 | ||||
| ↳ bulk / MOQ | €12.00 | €9.18 | €11–€14 | ||||
| Bambu Lab | €20.07 | 4 | €9.40 | €16–€24 | ▲ 0.3% | +0% | 4% |
| AzureFilm | €20.59 | 1 | €15.99 | €19–€24 | ▲ 8.4% | +3% | 4% |
| Overture | €18.73 | 1 | €10.43 | €17–€22 | ▲ 0.2% | -6% | 3% |
| ↳ bundles | €14.86 | €8.03 | €12–€19 | ||||
| Fiberlogy | €30.99 | 1 | €15.99 | €24–€36 | ▲ 0.1% | +55% | 3% |
| ↳ bundles | €25.39 | €23.00 | €23–€28 | ||||
| GEEETECH | €14.10 | 3 | €6.77 | €13–€17 | ▲ 0.4% | -29% | 3% |
| ↳ bundles | €8.74 | €6.25 | €8–€9 | ||||
| Flashforge | €26.99 | 1 | €20.07 | €24–€28 | ▬ | +35% | 3% |
| ↳ bundles | €50.61 | €43.55 | €50–€70 | ||||
| Anycubic | €17.70 | 5 | €8.91 | €16–€20 | ▲ 4.6% | -11% | 2% |
| ↳ bundles | €13.43 | €9.49 | €13–€19 | ||||
| ↳ bulk / MOQ | €9.74 | €7.63 | €9–€11 | ||||
| The Filament | €16.28 | 1 | €11.99 | €15–€22 | ▼ 4.2% | -19% | 2% |
| ↳ bundles | €13.20 | €13.20 | €13–€14 | ||||
| TINMORRY | €18.86 | 1 | €11.79 | €17–€21 | ▼ 5.7% | -6% | 2% |
| ↳ bundles | €17.22 | €10.03 | €16–€22 | ||||
| 3DJake | €24.99 | 1 | €17.99 | €20–€27 | ▬ | +25% | 2% |
| ↳ bundles | €24.00 | €19.00 | €19–€25 | ||||
| Extrudr | €36.18 | 1 | €24.99 | €27–€40 | ▲ 4.4% | +81% | 1% |
| ↳ bundles | €28.00 | €19.20 | €22–€38 | ||||
| Fillamentum | €25.45 | 2 | €12.89 | €22–€31 | ▬ | +27% | 1% |
| ↳ bundles | €26.51 | €17.39 | €22–€31 | ||||
| Nobufil | €29.99 | 1 | €23.99 | €28–€32 | ▬ | +50% | 1% |
| Recycling Fabrik | €24.00 | 1 | €18.00 | €23–€26 | ▬ | +20% | 1% |
By store · Global (all markets, EUR)
Each store's typical price across everything it carries (all materials mixed; stores heavy in engineering filament read higher). Same neutral yardstick for everyone: median, floor, trend.
Top 8 by listing volume; the table below covers all 43.
Top 12 of 53 by listing volume.
| Median /kg | Lowest | Typical range | 7-day | vs market | Share | |
|---|---|---|---|---|---|---|
| 3DJake | €21.71 | €10.39 | €18–€28 | ▲ 0.3% | +9% | 46% |
| ↳ bundles | €23.73 | €11.50 | €16–€35 | |||
| Elegoo | €16.30 | €11.28 | €14–€19 | ▼ 0.9% | -18% | 10% |
| ↳ bundles | €11.29 | €8.78 | €10–€14 | |||
| ↳ bulk / MOQ | €8.92 | €8.75 | €9–€9 | |||
| Eryone | €20.99 | €9.81 | €19–€24 | ▬ | +5% | 8% |
| ↳ bundles | €21.22 | €14.15 | €16–€23 | |||
| ↳ bulk / MOQ | €18.09 | €7.08 | €15–€21 | |||
| Digitmakers.ca | €14.42 | €7.50 | €11–€19 | ▲ 0.3% | -28% | 5% |
| ↳ bundles | €13.63 | €12.54 | €14–€16 | |||
| 3D Printing Canada | €16.30 | €7.83 | €13–€22 | ▲ 0.2% | -18% | 3% |
| ↳ bundles | €31.36 | €7.06 | €9–€60 | |||
| Polymaker | €17.84 | €10.70 | €18–€22 | ▲ 0.2% | -11% | 3% |
| ↳ bundles | €20.08 | €14.28 | €17–€28 | |||
| Overture3D | €18.73 | €10.43 | €17–€22 | ▲ 0.2% | -6% | 3% |
| ↳ bundles | €14.86 | €8.03 | €12–€19 | |||
| Flashforge | €26.99 | €20.07 | €24–€28 | ▬ | +35% | 3% |
| ↳ bundles | €50.61 | €43.55 | €50–€70 | |||
| Tinmorry | €18.86 | €11.79 | €17–€21 | ▼ 5.7% | -6% | 2% |
| ↳ bundles | €17.22 | €10.03 | €16–€22 | |||
| Bambu Lab | €21.22 | €16.30 | €19–€25 | ▲ 0.3% | +6% | 2% |
| shop.fillamentum.com | €25.45 | €12.89 | €22–€31 | ▬ | +27% | 1% |
| ↳ bundles | €26.51 | €17.39 | €22–€31 | |||
| Voxel Factory | €25.08 | €13.79 | €18–€39 | ▼ 2.2% | +25% | 1% |
Methodology
The SpoolHound Filament Price Index (SFPI) is a fixed-base-weight (Laspeyres) price index, computed separately for each region in its own currency. It is built every day from the active filament listings we find online across the web.
What's in it
Every price we track: dozens of retailers and manufacturer stores (Bambu Lab, Polymaker, SUNLU, Elegoo, Fillamentum and many more), affiliate or not. Standard single spools only (750 g–1.25 kg; no bundles, no minimum-order listings), normalised to price per kilogram. The basket covers PLA, PETG, ABS, ASA, TPU, nylon (PA) and polycarbonate, weighted by each material's listing share on the base date and held fixed thereafter, so the index measures pure price movement rather than shifts in what's listed. If a material temporarily drops below the five-listing publication floor, its last observed price is carried forward until it reappears, so a reporting gap never reads as a price move.
Average, not median
The index tracks a 10% trimmed mean (the average after dropping the cheapest and most expensive 10% of listings). A plain median is too coarse for markets that cluster on round price points: it can read as unchanged for weeks while prices genuinely move underneath. The trimmed mean stays robust to outliers but reflects the real market. The "typical range" columns show the 25th–75th percentile spread.
What's excluded, and why
Amazon listings are excluded entirely: Amazon's terms forbid price-history tracking, and a market index has to be built on prices we can stand behind. Everything published here is an aggregate (a median or quartile across many sellers), never any single seller's price. Cells with fewer than five listings are omitted as noise. Regional figures are converted between currencies using the daily ECB reference rate.
The data behind it
Refreshed daily across Europe, the UK, the US, Canada and Australia, from 41+ stores. Base 100 is set to 2026-06-29; the index rebases to the first full calendar month once enough history accumulates.
Open data
The full daily dataset behind this page is free to download and reuse under CC BY 4.0: the index by material and region and every drill-down dimension (grades, finishes, brands, stores, purchase sizes) as CSV, refreshed daily. Attribution is required: credit the "SpoolHound Filament Price Index" and, wherever the medium supports it, link to spoolhound.com beside the material you use (how to attribute). The monthly narrative edition is the Filament Price Report.
Reconstructed history
Where the chart shows a dashed segment, those points predate the daily collector and are reconstructed from archived feed data: a constant panel of four large retailers, chain-spliced to the full-market index on 2026-06-29. Validation against 15 days where both exist showed the panel tracking the full index within about one point (Europe only; we do not publish reconstructed history for other regions, where the surviving archive data failed that test). Solid segments are always full-market daily snapshots.
Revisions
Revision note, July 31, 2026: bundle segment basis change on July 25
How bundle listings were counted changed between July 19 and July 25, and the published bundle medians step with it. Some of the products we track are published as one entry per colour variant of the same listing. From July 19 to July 24 each of those variants was counted as a separate listing, which gave that group of products far more weight in the bundle segment than the number of actual listings justified. From July 25 each listing is counted once again, which restores the basis used before July 19.
Pooled across all markets, the effect on July 25 is a bundle median of €11.00/kg for PETG, up from €9.48 the day before (about 16%), and €11.86/kg for PLA, up from €11.23 (about 5.6%). That step measures a change in how listings are counted, not a change in what sellers charge. Bundle-segment figures either side of July 25 are not comparable with each other, and the size of the step differs by market, so read each market's bundle series across July 19 to July 25 as two segments rather than one.
What is not affected: the headline index, every single-spool average, median and typical range, and the per-material sub-indices, all of which are built from single spools only. Pooled PETG single-spool prices moved about 2% on the median basis across the same date, in line with ordinary daily movement. In the downloadable CSVs, bundle rows dated July 19 to July 24 carry the old basis and rows from July 25 onward carry the current one; single and minimum-order rows are unchanged throughout.