Best Filament for the Sovol Zero
A pre-built Voron 0.2 in a steel-and-glass box: only 152 mm cubed, but a 350 C hotend and a 120 C bed make it a genuine engineering-filament machine.
Specs verified 2026-11 · prices refreshed daily · page updated 6 November 2026
The Sovol Zero is an enclosed printer with a 152.4 × 152.4 × 152.5 mm build volume and a hotend reaching 350°C. It handles ABS, ASA, PC and nylon, and it runs abrasive carbon- and glass-fibre filament on its stock nozzle. Recommended materials: PLA, PLA+, PETG, TPU, PLA-CF, PETG-CF, ABS, ASA, PC, Nylon, CF / GF composites.
The Zero is the odd one in Sovol's range because its enclosure is standard, not an upgrade kit, and that changes what you can put through it. It ships with a 350 C hotend, a 120 C bed and glass panels on a steel frame, so ABS, ASA, PC and nylon are on the real list rather than the optimistic one. Tom's Hardware put the supported set at PLA, PETG, TPU, ABS, ASA, PC and nylon up to 350 C, and noted that at this size there is no need for an active chamber heater: a 152 mm cube warms itself from a 120 C bed. Sovol fits a chamber temperature sensor you can read in Mainsail.
What the Sovol Zero prints well
Recommended materials for this printer:
Enclosed and abrasive-ready out of the box, so it handles the full range from PLA to engineering composites, no nozzle swap needed.
Abrasives are covered in the box. Sovol includes both a brass 0.4 mm and a hardened steel 0.4 mm nozzle, and the hardened set is SKD11 rated to 450 C and sold for fibre-filled and particle-filled filament. Swap it in and PLA-CF, PETG-CF, PA-CF and PET-CF print without a parts order, which is rare at this price. One detail matters for high-temperature work: the right-side cavity cooling fan needs its magnetic cover fitted when running ABS, ASA or PC, otherwise the fan dumps chamber heat and you lose the passive warmth the enclosure is providing.
Sovol Zero specs that affect filament
The real constraint is 152.4 mm in every direction. That is a 3.5 litre envelope, so this is a machine for brackets, gears, connectors and test prints in demanding materials, not for helmets. In exchange you get 1200 mm/s rated motion, 40,000 mm/s² and a 50 mm³/s hotend, which is more flow than a 0.4 mm nozzle can use, so fitting 0.6 mm is worthwhile. Two filament notes from testing: the factory load temperature is 250 C and should be raised toward 300 C in the Klipper macros before loading PC, ABS, ASA or nylon, and the shipped OrcaSlicer profiles worked well for everything except TPU, which needed tuning.
Filament notes for the Sovol Zero
- The standard enclosure, 350 C hotend and 120 C bed make ABS, ASA, PC and nylon practical in a 152 mm cube.
- Both a brass and a hardened steel 0.4 mm nozzle ship in the box, so CF and GF filament costs nothing extra.
- Fit the magnetic cover over the side cavity fan when printing ABS, ASA or PC, or the chamber loses its heat.
- There is no active chamber heater, which at this build size is not a limitation; bed heat warms the cube.
- Raise the filament load temperature from the factory 250 C toward 300 C before loading PC, ABS or nylon.
- The 50 mm³/s hotend outruns a 0.4 mm nozzle, so 0.6 mm is the way to use the 1200 mm/s motion rating.
- Stock OrcaSlicer profiles are solid except for TPU, which needs its own speed and retraction tuning.
The deals above are filtered to the materials the Sovol Zero handles, aggregated from multiple retailers daily and normalised to cost per kg, so the cheapest in-stock option is always on top. Prices refresh every 24 hours and are region-aware, so switch your region in the nav. Click through to the retailer to confirm the live checkout price.
Frequently Asked Questions
Different printer? See filament by printer for the rest of the lineup, or browse cheapest filament by material.